Can-Am Unveils 2016 Renegade X mr

HANDLING

FOX PERFORMANCE SERIES 1.5 PODIUM† RC2 piggyback adjustable shocks2016 Renegade X mr 1000R Hyper Silver, Black, Octane Blue_side

These high-performance shocks have high- and low-speed compression, rebound and preload adjustments to allow riders the flexibility of tuning the suspension to fit the terrain and riding style. The FOX PERFORMANCE SERIES 1.5 PODIUM RC2 piggyback shocks also enhance the 2016 Renegarde X mr 1000R ATV’s handling and performance in challenging conditions.

14-inch (35.6 cm) cast-aluminum beadlock wheels

The large cast-aluminum wheels give the Renegade X mr 1000R an aggressive look and wear color-matching and fully functional beadlocks to ensure performance in the deepest of mud holes.

30-inch (76.2 cm) Gorilla Axle Silver back tires

The proven 30-inch Gorilla Axle Silverback tires were chosen for their exceptional mud-riding characteristics. Developed by Gorilla Axle, these tires have been tested
in the challenging mud holes in the Southern U.S. They have tall lugs and an aggressive tread pattern for superb mud performance.

Torsional Trailing arm Independent (TTITM) rear suspension

Using far less moving parts than competitive systems, TTI was designed to eliminate scrub and camber changes when the suspension works up and down and keep the quad in straight line. Unique to Can-Am, the proven Torsional Trailing arm Independent rear suspension offers increased rigidity. This suspension setup also includes a removable external sway bar and lower pivot points for geometric squatting to improve traction and the transferring of power to the ground.

Double A-arm front suspension with dive-control geometry

The Renegade ATVs have a race-proven double A-arm configuration with motion-control shocks and five-way adjustable preload settings. Dive-control geometry tightly controls the roll-center, especially when entering corners.

Tri-Mode Dynamic Power Steering (DPSTM)

Calibrated specifically for aggressive trail riding and racing, the Tri-Mode DPS system features three modes (MIN, MED and MAX) allowing riders to select the desired amount of steering assist for the terrain and conditions.

Visco-Lok QE‡ front differential

The Renegade X mr 1000R model includes the Visco-Lok Quick Engagement calibration, giving the front differential an even shorter responding time.

SST G2 frame

The Renegade X mr 1000R uses the proven one-up Surrounding Spar Technology (SST) G2 frame and shorter wheelbase compared
to its sibling, the Outlander X mr 1000R. The welded-steel SST frame offers increased structural integrity and handling with fewer parts.

214 mm hydraulic disc brakes

Two large 214 mm disc brakes with twin-piston calipers up front and two, twin-piston caliper and 214 mm hydraulic rear disc brakes comprise the Renegade ATV braking system. It includes separate front and rear hand brake levers

RIDER-FOCUSED DESIGN

NEW Revised maintenance break-in
The early break-in maintenance requirement is no longer necessary on the Renegade, saving consumers time and money in the long run. The first maintenance required is after one year (or 1,500 km / 932 miles) from 10 hours (300 km / 186 miles).

Easy-to-use maintenance center

Easily accessible and out of the elements under the seat, a centralized maintenance area offers easier access and improved protection. The rear brake fluid reservoir, solenoid starter, battery and relays are also conveniently located under the seat.

3,000-pound WARN winch

A 3,000-pound (1,361kg) WARN winch could come in handy should the mud prove too troublesome for you or your riding partners.

Front bumper and rear push bar

The rugged front bumper and rear push bar protect this powerful mud machine in the toughest of conditions and also provide an unmistakable look.

Leave a Reply